Accessories

PARALLEL CABLES
Full loaded 25 way Male to Female Cables available in 3 Meter lengths
Code PC3 £5

USB 2 3 Meter A to B cables

A high quality USB 2 / 1.1 cable, 3 meters long, can be used in with any system or as a input power cable for Optoport.

Code USB3 £3.00

Plastic Enclosures

Connection boxs in Grey ABS plastic with adjustable size cable grommets and snap on lid, ideal for interconnections between stepper motors and cables:

Size 1 H32 W65 L65 : Code CB1 £1.35

Size 2 H40 W80 L80 : Code CB2 £1.65

Terminal Block

12 way, 6 Amp rating. Ideal for use with connection boxes above for coupling stepper motor, microswitch signals etc. Easily cut to size required.

Code TB1 £0.45

Cable and Accessories

Polythene Spiral Cable Wrap, 2.5mtr long

Size 1 Clear spiro Int 1.5mm, max wrap size upto 15mm : Code SCW1 £0.80

Size 2 Black spiro Int 4.1mm, Max wrap size upto 35mm : Code SCW2 £0.80

Gremflex Expandable Braided sleeving 6 mm black in 2.5Mtr lengths. Lightweight but tough, adjustable between 4 to 11 mm, continuous working temperature -50 to 150C and resistant to most chemicals.
Code EB6 £1.70

Cable Tie Mounts
These cable tie mounts have self adhesive or central screw fixing and come complete with a 125mm cable tie.
Supplied in packs of 10 : Code CT1 £2.00

Cable Glands

M12 X 1.5mm Cable range 3.5-7mm complete with locknut : Code CG1 £0.50

TRI-RATED WIRE 16/0.2mm 10A 600V. Ideal for stepper motor and power supply connections. Max temperature 105C, Outside Dia 2.6mm

Available in 6 colours, supplied in 5 Mtr coils £0.90

• Code W16R Red
• Code W16BK Black
• Code W16G Grey
• Code W16W White
• Code W16Y Yellow
• Code W16BR Brown

CHANGEOVER SWITCHES

Thermoplastic surface mount enclosure with M25 cable entry.
IP55 protection in front panel.
Supplied with Hand, Off, Auto faceplate.

Ideal for switching mains motors from manual to CNC control.
Available as single, double or triple pole switch with 20 Amp or 6.5 KW contact rating.

• Code CS120 £19.50 single pole
• Code CS220 £22.00 double pole
• Code CS320 £24.50 triple pole

SHORT ROLLER MICRO SWITCH

OMRON Miniature, Short Roller . L22 X 10mm fixing holes, Operating force 2.3N,SPDT 250V 15Amp, Travel 1.6mm. Code MSR1 £1.75

NEW MICRO SWITCH

SAIA BURGESS Miniature, Medium length Roller arm (28 mm), SPDT 250V 15Amp. Code MSR2 £1.60

NEW HELLERMANN CABLE MARKING SYSTEM

Set of 200 marker clips (20 sets of 0-9) to fit cables between 2.8 mm -3.8 mm. Ideal if you have a bunch of cables to sort, all the same colour.
Code HCM1 £4.75

Cooling Fan

Low noise, 80 X 80 X 25 mm, 12V DC cooling fan, ideal for cooling stepper drive boards.
21 cfm, 1800 RPM, 160 mA consumption, sleeve bearings. 3 pin connector with RPM sensor. Supplied complete with fixing screws. Ideal for our System3 + board.
Code CF80 £4.00