A Stylish metal enclosure with aluminum end panels.
Enclosure has ventilation holes on both side walls, base and lid.
Dimensions:
 External Height  133mm
 External Length  279mm
 External Width  203mm
 End Panel Colour  Light Grey

Supplied in flat pack self assembly.

Order ref EN1 £39 W19
Order ref EN1BP £51 W25

Larger metal enclosure with aluminum end panels.
Enclosure has ventilation holes on both side walls, base and lid.
Dimensions:
 External Height  133mm
 External Length  279mm
 External Width  303mm
 End Panel Colour  Light Grey

Supplied in flat pack self assembly with optional base plate.

Order ref EN2 £46 W25
Order ref EN2BP £62 W33
 

EN2 BASE PLATE

Fully Enclosed System4C

Fitting kit for System4C in the EN1 enclosure. Comprising of EN1 enclosure with base plate EN1BP, CF80 fan, ready wired switched mains socket ENAC, power supply wire, screws, spacers, back and front transparent self adhesive labels.
Code SYS4KIT £61 W36

Ready wired, switched power socket
Code ENAC £6 W1

High quality professional diecast XLR 4 pin stepper motor connectors and plugs.
Supplied as a pair Code XLR4 £7.50 W1

Ready wired XLR connectors with colour code plugs.
X Axis Code XLR4WR £9 W1
Y Axis Code XLR4WY £9 W1
Z Axis Code XLR4WG £9 W1
A Axis Code XLR4WB £9 W1

5 pin auxiliary connector plug and socket for Spindle board or power /signal requirements Supplied as a pair Code X5P £4 W1

SYS4KIT Enclosure and Labels not shown

SYS4C Rear view showing all connections

SYS4C internal view of 3 axis system

XLR4 Connectors

X5P Connector

Picture shows 350W PSU bolted to EN1BP base plate but smaller power supplies could be fitted as required.

ENAC Fused, Switched IEC mains connectors