Pulleys have pilot hole and can be re-bored to maximum sizes shown.

5 mm Pitch, 9 mm wide belt. Available in the following sizes

• 12 tooth, 13mm dia, 8 mm max bore, flange dia 25 mm, pitch dia 19.1 mm, width 20 mm Code HTD12 £5.20 W1
• 14 tooth, 13 mm dia, 9 mm max bore , flange dia 25 mm, pitch dia 22.3 mm, width 20 mm Code HTD14 £5.45 W1
• 16 tooth, 16 mm dia, 11 mm max bore, flange dia 28 mm, pitch dia 25.46 mm, width 20 mm Code HTD16 £6.05 W1
• 20 tooth, 23 mm dia, 14 mm max bore, flange dia 36 mm, pitch dia 31.83 mm, width 22.5 mm Code HTD20 £7.30 W2
• 24 tooth, 27 mm dia, 18 mm max bore, flange dia 42 mm, pitch dia 38.2 mm, width 22.5 mm Code HTD24 £8.40 W2
• 28 tooth, 30.5 mm dia, 20 mm max bore, flange dia 48 mm, pitch dia 44.56 mm, width 22.5 mm Code HTD28 £8.90 W2
• 32 tooth, 38 mm dia, 26 mm max bore, flange dia 54 mm, pitch dia 50.93 mm, width 22.5 mm Code HTD32 £10.70 W3
• 40 tooth, 38 mm dia, 26 mm max bore, flange dia 71 mm, pitch dia 63.66 mm, width 22.5 mm Code HTD40 £13.50 W4

Synchronous HTD 5M-09 timing belts

Heavy duty high torque 5 mm Pitch, 9 mm wide drive belts available in the following sizes

• 225 mm Code TB225
• 265 mm Code TB265
• 300 mm Code TB300
• 330 mm Code TB330
• 350 mm Code TB350
• 375 mm Code TB375
• All the above belts are £4.00 W1
• .............................................
• 400 mm Code TB400
• 425 mm Code TB425
• 450 mm Code TB450
• 475 mm Code TB475
• All the above belts are £4.80 W1
• ............................................
• 500 mm Code TB500 £5.00 W1
• 550 mm Code TB550 £5.40 W1
• 600 mm Code TB600 £6.00 W1
• 800 mm Code TB800 £7.00 W1

Pulleys have pilot hole and can be re-bored to maximum sizes shown.

5 mm Pitch, 15 mm wide belt. Available in the following sizes

• 12 tooth, 13mm dia, 8 mm max bore, flange dia 25 mm, pitch dia 19.1 mm, width 26 mm Code HTDW12 £6.80 W1
• 14 tooth, 13 mm dia, 9 mm max bore , flange dia 25 mm, pitch dia 22.3 mm, width 26 mm Code HTDW14 £7.40 W1
• 15 tooth, 16 mm dia, 11 mm max bore, flange dia 28 mm, pitch dia 25.46 mm, width 26 mm Code HTDW15 £7.80 W2
• 20 tooth, 23 mm dia, 14 mm max bore, flange dia 36 mm, pitch dia 31.83 mm, width 28.5 mm Code HTDW20 £8.90 W2
• 24 tooth, 27 mm dia, 18 mm max bore, flange dia 42 mm, pitch dia 38.2 mm, width 28.5 mm Code HTDW24 £11.00 W2
• 28 tooth, 30.5 mm dia, 20 mm max bore, flange dia 48 mm, pitch dia 44.56 mm, width 28.5 mm Code HTDW28 £12.10 W3
• 30 tooth, 38 mm dia, 26 mm max bore, flange dia 54 mm, pitch dia 50.93 mm, width 28.5 mm Code HTDW30 £13.20 W3
• 40 tooth, 38 mm dia, 26 mm max bore, flange dia 71 mm, pitch dia 63.66 mm, width 28.5 mm Code HTDW40 £16.80 W4

Synchronous HTD 5M-15 timing belts

Steel Metric Torx screws

M3 Use T10
M4 Use T20
M5 Use T25

Heavy duty high torque 5 mm Pitch, 15 mm wide drive belts available in the following sizes

• 350 mm  Code TBW350 £6.80 W1
• 400 mm  Code TBW400 £7.20 W1
• 450 mm  Code TBW450 £7.50 W1
• 500 mm  Code TBW500 £7.90 W1
• 550 mm  Code TBW550 £8.30 W1
• 600 mm  Code TBW600 £8.80 W1
• 700 mm  Code TBW700 £9.40 W2
• 800 mm  Code TBW800 £10.20 W2
• 900 mm  Code TBW900 £10.90 W2
• 1050 mm Code TBW1050 £12.10 W2
• 1500 mm Code TBW1500 £15.70 W3

Torx screws, a cost effective alternative to cap screws.
These steel, zinc plated pan head screws allow high tightening pressure using T-Drive system comparable to cap head fixing but much lower cost. Available in M3, M4 & M5 sizes.

Thread size by length, supplied in packs of 10 / 25

• M3 X 12 mm Code TX312 £0.40 / £0.80 W1
• M3 X 20 mm Code TX320 £0.50 / £1.00 W1
• M4 X 12 mm Code TX412 £0.65 / £1.30 W1
• M4 X 20 mm Code TX420 £0.75 / £1.50 W2
• M5 X 20 mm Code TX520 £1.00 / £2.00 W2
  
   

 Steel Knurled cup Set Screws
Supplied in pack of 10 pieces
DIN 916 Grade 14.9 high strength steel, hexagon drive.

• M4 X 6 mm  Code SS46  £1.00
• M5 X 6 mm  Code SS56  £1.00
• M5 X 10 mm Code SS510 £1.00
• M6 X 6 mm  Code SS66  £1.00
• M6 X 8 mm  Code SS68  £1.00
  All sizes W1